When considering installing vinyl flooring in your home or office, it is crucial to follow a careful process to ensure a good result.
In this guide, we cover the necessary tools, preparation, installation instructions, and maintenance tips step by step so you can get the most out of your new Trevo flooring.
Necessary Tools: Before beginning installation, make sure you have the following tools:
Tape measure
Saw
Rubber mallet with white head
Spacers
Pencil and square
Preparation and Important Information: Before starting the installation, it is essential to follow some important preparation steps and considerations:
2.1 Examination of Materials: Carefully check the condition of the vinyl flooring before installation. Color and pattern consistency is only guaranteed for materials from the same batch. Avoid mixing different batches.
2.2 Acclimatization: Allow the vinyl flooring to acclimatize horizontally in the environment where it will be installed for at least 24 hours before installation.
2.3 Temperature Conditions: Vinyl flooring should be installed in a space with a temperature between 10°C and 25°C. Make sure thate que a temperatura da base não seja inferior a 10°C.
2.4 Base Conditions: Check that the base complies with DIN 18365. The base must be stable, flat, clean, solid, and completely dry. The maximum tolerance for irregularities in the base is 2 mm per linear meter, in accordance with DIN 18202.
2.5 Removal of Old Flooring: Be sure to remove any old flooring before proceeding with installation.
Installation Process: Proper installation is essential for the durability and aesthetics of your vinyl flooring. Follow these steps carefully:
3.1 Installation Direction: When fitting the panels, place the “male” side facing the wall. Maintain a minimum distance of 30 cm between the tops of the planks and ensure that the last row is at least half the width of a plank. Install the planks perpendicular to the main light source.
3.2 Expansion Joints: Use appropriate spacers to ensure a continuous joint of at least 5 mm throughout the application. Maintain a distance of at least 5 mm from fixed objects such as pipes and door stops.
3.3 Use of Silicone: In exceptional circumstances, such as wet areas (bathrooms and kitchens), use silicone. Joints at the edges of wet areas can be filled to prevent water infiltration. Door expansion joints can be filled with silicone using an anti-infiltration tape.
3.4 Profiles and Expansion Joints: Larger areas que 150m2 ou com obstáculos e nas transições de divisão deve considerar o uso de juntas de expansão de pelo menos 5mm. Ao instalar rodapés ou perfis de acabamento, não os conecte ao pavimento.Cleaning and Maintenance: After installation, clean the entire floor. Use a vacuum cleaner or a damp cloth with mild detergent. Avoid substances that may cause stains. Do not use harsh solvents or polishing products.
Following these installation guidelines will ensure that your vinyl flooring is installed successfully and maintains its beauty and durability over time. Remember to always follow the manufacturer’s recommendations and consider hiring a professional installer. profissional se necessário, para obter os melhores resultados possíveis.
